MMOMinion

Full Version: Help with setting up profiles
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5
Ymko not sure percentages are working correct in 2.1.0. I changed hasty hand in Culinary profile to 100 for 100% and it is running it as 100 Durability and jumping right to progress instead of continuing the IQ stack.
That's because it's not = to 100% but >= or <= 100% so you can't put 100% it will not work coz when it will check the condition even at 100% quality the hasty touch will launch coz it's still <= 100% (since 100% = 100%), i actually asked Ymko it we would be able to put max values in the future that would be cool (or have a dropdown menu for the condition so that we could force to < or > or = )
(11-11-2013, 05:04 PM)R3P0 Wrote: [ -> ]Ymko not sure percentages are working correct in 2.1.0. I changed hasty hand in Culinary profile to 100 for 100% and it is running it as 100 Durability and jumping right to progress instead of continuing the IQ stack.
<= 99 NOT HUNDRED :P Because if you set it to 100 it will still evaluate to true when its 100% :P

(11-11-2013, 02:16 PM)Shaolin2 Wrote: [ -> ]thx ymko :)

hmm the profil did not work
when Excellent or Good bot stuck with
"Can't cast anything please check that your profil is set up correctly"

ok i delet the conditions Excellent and Good and set CP to 30
now trying. i need 2 steps to finisch the Craft.

no... i try a fresh installation ^^
That's strange... very, strange :P Try using the debug and see where it fails :P
Remember checking less or equals(<=) and more or equals(>=), so if it's 2 steps it should be <= 20.

Also with the latest version you can actually do this(2 step craft, 40 durability):
Inner Quiet (step <= 1)
Durability (durability <= 10)
Synth (durability <= 10, progress >=50)
Synth (durability <= 20, progress <=50)
Standart Touch(cp >=110, condition Good or Excellent)
Hasty Touch

And that should work for you :P
(11-11-2013, 06:03 PM)ymko Wrote: [ -> ]
(11-11-2013, 05:04 PM)R3P0 Wrote: [ -> ]Ymko not sure percentages are working correct in 2.1.0. I changed hasty hand in Culinary profile to 100 for 100% and it is running it as 100 Durability and jumping right to progress instead of continuing the IQ stack.
<= 99 NOT HUNDRED :P Because if you set it to 100 it will still evaluate to true when its 100% :P

tried this it still did not work
(11-11-2013, 07:22 PM)R3P0 Wrote: [ -> ]
(11-11-2013, 06:03 PM)ymko Wrote: [ -> ]
(11-11-2013, 05:04 PM)R3P0 Wrote: [ -> ]Ymko not sure percentages are working correct in 2.1.0. I changed hasty hand in Culinary profile to 100 for 100% and it is running it as 100 Durability and jumping right to progress instead of continuing the IQ stack.
<= 99 NOT HUNDRED :P Because if you set it to 100 it will still evaluate to true when its 100% :P

tried this it still did not work
Strange, i'll have a look, but i can't do it today, maybe tomorrow, but i tested it and it seemed to work :P
Try opening console turning on the debug and tracing the problem :P
yup for me it work as intended :)
So how's it going R3P0?
I have a little example of a good setup in the FAQ spoiler :P
Im well on into Weaver at this point and things still do not setup 100 percent correctly with these new settings

I am trying to setup a weaver profile for 30+ and getting now where fast, from what i see this should run but it does not it just sits there again
CT_Prof=Weaver
CT_ID=100098
CT_NAME=Tricks Of The Trade
CT_ON=1
CT_PRIO=1
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=246
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=Good
CT_CONDTWO=Good
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=256
CT_NAME=Inner Quiet
CT_ON=1
CT_PRIO=2
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=1
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=251
CT_END=0
CT_ID=281
CT_NAME=Steady Hand II
CT_ON=1
CT_PRIO=3
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=262
CT_END=0
CT_ID=100062
CT_NAME=Master's Mend
CT_ON=1
CT_PRIO=4
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=10
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100061
CT_NAME=Basic Touch
CT_ON=1
CT_PRIO=5
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=18
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100060
CT_NAME=Basic Synthesis
CT_ON=1
CT_PRIO=6
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
(11-23-2013, 01:45 PM)R3P0 Wrote: [ -> ]Im well on into Weaver at this point and things still do not setup 100 percent correctly with these new settings

I am trying to setup a weaver profile for 30+ and getting now where fast, from what i see this should run but it does not it just sits there again
CT_Prof=Weaver
CT_ID=100098
CT_NAME=Tricks Of The Trade
CT_ON=1
CT_PRIO=1
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=246
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=Good
CT_CONDTWO=Good
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=256
CT_NAME=Inner Quiet
CT_ON=1
CT_PRIO=2
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=1
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=251
CT_END=0
CT_ID=281
CT_NAME=Steady Hand II
CT_ON=1
CT_PRIO=3
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=262
CT_END=0
CT_ID=100062
CT_NAME=Master's Mend
CT_ON=1
CT_PRIO=4
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=10
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100061
CT_NAME=Basic Touch
CT_ON=1
CT_PRIO=5
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=18
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100060
CT_NAME=Basic Synthesis
CT_ON=1
CT_PRIO=6
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
Use version 2.1.0 for now... there is 2.2 coming out Sunday hopefully... :P
(11-23-2013, 02:08 PM)ymko Wrote: [ -> ]
(11-23-2013, 01:45 PM)R3P0 Wrote: [ -> ]Im well on into Weaver at this point and things still do not setup 100 percent correctly with these new settings

I am trying to setup a weaver profile for 30+ and getting now where fast, from what i see this should run but it does not it just sits there again
CT_Prof=Weaver
CT_ID=100098
CT_NAME=Tricks Of The Trade
CT_ON=1
CT_PRIO=1
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=246
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=Good
CT_CONDTWO=Good
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=256
CT_NAME=Inner Quiet
CT_ON=1
CT_PRIO=2
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=1
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=251
CT_END=0
CT_ID=281
CT_NAME=Steady Hand II
CT_ON=1
CT_PRIO=3
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=262
CT_END=0
CT_ID=100062
CT_NAME=Master's Mend
CT_ON=1
CT_PRIO=4
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=10
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100061
CT_NAME=Basic Touch
CT_ON=1
CT_PRIO=5
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=18
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100060
CT_NAME=Basic Synthesis
CT_ON=1
CT_PRIO=6
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
Use version 2.1.0 for now... there is 2.2 coming out Sunday hopefully... :P

This is 2.1
Pages: 1 2 3 4 5