MMOMinion

(04-18-2014, 03:41 PM)KAGARI Wrote: [ -> ]Hi there,
I'm having issues with Atma farming in central thanalan. I've tried reloading several times and messing with the settings, but my character just sits at the crystal. Has anyone encountered this or know a work-around?

I had this same issue a little while ago. Make sure to check your Fate Settings. It was confusing for me at first too. The +/- level settings are according to YOUR current level not the level of the Fates that you are trying to grind. So if that is the case, the Fate settings on the bot should be 0 for the + setting and 49 for the - setting. This tells the bot to search for Fates that are +0 levels above you (assuming you are max level of 50) and -49 levels below you (or in this case Fates with a level of 1).

I believe setting both values to 0 will also do the same thing, however, I have not tried this. I know that if you have the above mentioned settings, the bot will search every Fate in every zone if you are level 50.

I have both settings at 0 and it works just fine. Does every fate except blacklisted ones.

(04-18-2014, 08:04 PM)sero175 Wrote: [ -> ]

(04-18-2014, 03:41 PM)KAGARI Wrote: [ -> ]Hi there,
I'm having issues with Atma farming in central thanalan. I've tried reloading several times and messing with the settings, but my character just sits at the crystal. Has anyone encountered this or know a work-around?

I had this same issue a little while ago. Make sure to check your Fate Settings. It was confusing for me at first too. The +/- level settings are according to YOUR current level not the level of the Fates that you are trying to grind. So if that is the case, the Fate settings on the bot should be 0 for the + setting and 49 for the - setting. This tells the bot to search for Fates that are +0 levels above you (assuming you are max level of 50) and -49 levels below you (or in this case Fates with a level of 1).

I believe setting both values to 0 will also do the same thing, however, I have not tried this. I know that if you have the above mentioned settings, the bot will search every Fate in every zone if you are level 50.

I tried this and it unfortunately did not help :(

(02-26-2014, 04:04 AM)Latty79 Wrote: [ -> ]I've been gathering mythril ore for over 24 hours now. Not having issues with any nodes, that pic on the last page looks like an old version. I'd recommend deleting the mesh and letting the bot download it again.

Hey Latty first off I wanted to say thank you for all your contributions. Your meshes helped me so much!

But now to my question. I have the same problem in that same exact spot. My bot was working fine then all of a sudden it would get stuck at that one spot but if I came to my computer and moved my character slightly he would begin botting again. However, I have just subscribed to this bot, so I figure I already have the latest files. I messed with the mesh a little to try to figure the problem on my own but things got even worse and now I can't even bot in Southern Thanalan, but I would really like to. Any suggestions or advice?


Again thank you so much!

I'm having issues with the gathering, tried reading the tutorials around the forums but I don't think I'm understand it. A lot of the places gives me "D= Error The Loaded navmesh has no mining bot/botany ma" I can't see the full message.

It will go around the gathering spots, only if I'm near it but it doesn't harvest the items i requested for and only does the top upper one for a lot of the areas (some areas do work).

i have redownloaded as well

(04-18-2014, 10:04 PM)KAGARI Wrote: [ -> ]

(04-18-2014, 08:04 PM)sero175 Wrote: [ -> ]

(04-18-2014, 03:41 PM)KAGARI Wrote: [ -> ]Hi there,
I'm having issues with Atma farming in central thanalan. I've tried reloading several times and messing with the settings, but my character just sits at the crystal. Has anyone encountered this or know a work-around?

I had this same issue a little while ago. Make sure to check your Fate Settings. It was confusing for me at first too. The +/- level settings are according to YOUR current level not the level of the Fates that you are trying to grind. So if that is the case, the Fate settings on the bot should be 0 for the + setting and 49 for the - setting. This tells the bot to search for Fates that are +0 levels above you (assuming you are max level of 50) and -49 levels below you (or in this case Fates with a level of 1).

I believe setting both values to 0 will also do the same thing, however, I have not tried this. I know that if you have the above mentioned settings, the bot will search every Fate in every zone if you are level 50.

I tried this and it unfortunately did not help :(

I had the same problem. When I clicked MeshManager and then Show Navmesh (Which is under General), it showed nothing at all, so somehow the bot had deleted the navmesh so I'd check that first. If it's deleted:

Try deleting the files from PATH/FFXIVMinion/Navigation and forcing an update, or download the BETA version from this topic and try that mesh.

(Though expect to do this often, as I find it happening over and over again)

Central Thanalan always gets stuck at the 50 botany spot, ill get a screen shot next time it happens. It happened on one other mesh but im not sure which one. Can you fix this, or tell me how to?

I'm having this problem:



Where the green rectangle is .. are safespots that the bot doesn't get all confused and does 360 x 3 or 360 x 4. I've tried deleting the triangles and adding the off-mesh connection right where the X's are but that didn't work. It'd still get stuck there routinely -- and because that route is very populated, it looks easily immensely suspicious after watching a botter get stuck on the very same spot after so many times. The mesh for botting the illuminary weapon SORT OF alleviates it. But not really .. cuz if you watch the bot, it still turns 360 a couple times here and there.

As for deleting triangles .. it takes me like 10 minutes to save after that. By save, I mean turn the mesh into a completely corrupted mesh, forcing me to delete and redl it. After trying about 5 times, I give. :\

Halp!!


Edit: Resized the image

Most of the meshes mess up in places for me :s I think they need an update ^^. Good work on mesh's though :D keep them coming!

yeah a lot of meshe are broken, Dev Team must fix thell all =/