MMOMinion
Level 80 2-Star 35 & 70D - Printable Version

+- MMOMinion (https://www.mmominion.com)
+-- Forum: FFXIVMinion (https://www.mmominion.com/forumdisplay.php?fid=87)
+--- Forum: [DOWNLOADS] Addons, Lua Modules, Navigation Meshes.. (https://www.mmominion.com/forumdisplay.php?fid=90)
+---- Forum: SkillManager Profiles (https://www.mmominion.com/forumdisplay.php?fid=105)
+----- Forum: Disciples of The Hand Profiles (https://www.mmominion.com/forumdisplay.php?fid=113)
+----- Thread: Level 80 2-Star 35 & 70D (/showthread.php?tid=21878)

Pages: 1 2

RE: Level 80 2-Star 35 & 70D - petoria - 09-22-2019

(09-21-2019, 01:42 PM)tannerru Wrote:  
(09-21-2019, 08:45 AM)Gseeker Wrote:  
(09-20-2019, 04:29 PM)tannerru Wrote:  Just figured I would put this out there,

Base Stats
Craft - 2254
Control- 2251
CP - 541

Food - HQ Cunning Craftsman's Syrup and HQ Blood Bouillabaisse

Was trying to Craft Grade 2 Tincture of Strength and was unable to complete the craft.

The 70D works flawlessly. The 35D very rarely might fail BUT if you tweek the profile just a bit it works perfect also, and it even uses Reuse if you have the CP. Don't know why it failed for you! :(

Base stats
craft - 2245
control - 2213
cp - 541

Yea It really did not make sense to me, It will 100% it Quality wise. But fail on progress.

Did it fail just once or is it a constant failure?
i can try and lower my stats to test but i have not had a single progress failure on either profiles

RE: Level 80 2-Star 35 & 70D - petoria - 09-22-2019

I finally saw 2 failures on 70D making Robe Lettuce Salad. checked the log and manipulation was skipped both times, then it went back to normal, i'm not really sure how to fix that unfortunately

RE: Level 80 2-Star 35 & 70D - tannerru - 09-23-2019

(09-22-2019, 03:36 AM)petoria Wrote:  
(09-21-2019, 01:42 PM)tannerru Wrote:  
(09-21-2019, 08:45 AM)Gseeker Wrote:  
(09-20-2019, 04:29 PM)tannerru Wrote:  Just figured I would put this out there,

Base Stats
Craft - 2254
Control- 2251
CP - 541

Food - HQ Cunning Craftsman's Syrup and HQ Blood Bouillabaisse

Was trying to Craft Grade 2 Tincture of Strength and was unable to complete the craft.

The 70D works flawlessly. The 35D very rarely might fail BUT if you tweek the profile just a bit it works perfect also, and it even uses Reuse if you have the CP. Don't know why it failed for you! :(

Base stats
craft - 2245
control - 2213
cp - 541

Yea It really did not make sense to me, It will 100% it Quality wise. But fail on progress.

Did it fail just once or is it a constant failure?
i can try and lower my stats to test but i have not had a single progress failure on either profiles

It was a consistent failure after HQ mats were gone. I'm fully melded with comfy melds.
With foods I am at 
Craftsmanship - 2254
Control- 2315
CP-623

Unless this legit needs BIS melds.

RE: Level 80 2-Star 35 & 70D - petoria - 09-25-2019

(09-23-2019, 03:30 PM)Tannerru Wrote:  
(09-22-2019, 03:36 AM)petoria Wrote:  
(09-21-2019, 01:42 PM)tannerru Wrote:  
(09-21-2019, 08:45 AM)Gseeker Wrote:  
(09-20-2019, 04:29 PM)tannerru Wrote:  Just figured I would put this out there,

Base Stats
Craft - 2254
Control- 2251
CP - 541

Food - HQ Cunning Craftsman's Syrup and HQ Blood Bouillabaisse

Was trying to Craft Grade 2 Tincture of Strength and was unable to complete the craft.

The 70D works flawlessly. The 35D very rarely might fail BUT if you tweek the profile just a bit it works perfect also, and it even uses Reuse if you have the CP. Don't know why it failed for you! :(

Base stats
craft - 2245
control - 2213
cp - 541

Yea It really did not make sense to me, It will 100% it Quality wise. But fail on progress.

Did it fail just once or is it a constant failure?
i can try and lower my stats to test but i have not had a single progress failure on either profiles

It was a consistent failure after HQ mats were gone. I'm fully melded with comfy melds.
With foods I am at 
Craftsmanship - 2254Control- 2315
CP-623

Unless this legit needs BIS melds.
does not need BIS melds, when i made it i did not have them and was still completing just fine. i think sometimes minion wonks out and skips some steps, i thought about adding checks to certain steps to keep from failing but i think that would just make the synth hang without any real feedback as to what is wrong.
below is the profile with your stats, my best guess is ingenuity or manipulation is not going off. 
also someone else posted a newer profile that may work better and i posted a profile that Zanci made that may also perform better 

[Image: JvxVI0N.jpg]

RE: Level 80 2-Star 35 & 70D - djevol - 10-15-2019

still uses great strides even though quality is at 100% before step 19-20.

RE: Level 80 2-Star 35 & 70D - djevol - 10-17-2019

consistently failing on prismatic ingot, 2* 35D crafting. the bot just increases quality until it breaks..
i'm at minimum for everything except CP, 2248 craftmanship, 2228 control, 509 cp unbuffed.

EDIT: weird. restarting the bot worked. Guess it wonked out somehow. RIP my prismatic ingot mats.

RE: Level 80 2-Star 35 & 70D - knighted1 - 10-19-2019

Mine is messing up too namely i think with great strides getting used too early.

RE: Level 80 2-Star 35 & 70D - uaebuster - 10-30-2019

^^ this will need an update with the changes of 5.1 update, it's no longer a valid file. Embarrassing

appreciate the efforts it use to work like magic for me. Expect