Help with setting up profiles - Printable Version

Help with setting up profiles - Printable Version

+- MMOMinion (https://www.mmominion.com)
+-- Forum: FFXIVMinion (https://www.mmominion.com/forumdisplay.php?fid=87)
+--- Forum: [DOWNLOADS] Addons, Lua Modules, Navigation Meshes.. (https://www.mmominion.com/forumdisplay.php?fid=90)
+---- Forum: Outdated (https://www.mmominion.com/forumdisplay.php?fid=110)
+---- Thread: Help with setting up profiles (/showthread.php?tid=4787)

Pages: 1 2 3 4 5

RE: Help with setting up profiles - ymko - 11-23-2013

(11-23-2013, 02:32 PM)R3P0 Wrote:
(11-23-2013, 02:08 PM)ymko Wrote:
(11-23-2013, 01:45 PM)R3P0 Wrote: Im well on into Weaver at this point and things still do not setup 100 percent correctly with these new settings

I am trying to setup a weaver profile for 30+ and getting now where fast, from what i see this should run but it does not it just sits there again
CT_Prof=Weaver
CT_ID=100098
CT_NAME=Tricks Of The Trade
CT_ON=1
CT_PRIO=1
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=246
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=Good
CT_CONDTWO=Good
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=256
CT_NAME=Inner Quiet
CT_ON=1
CT_PRIO=2
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=1
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=251
CT_END=0
CT_ID=281
CT_NAME=Steady Hand II
CT_ON=1
CT_PRIO=3
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=262
CT_END=0
CT_ID=100062
CT_NAME=Master's Mend
CT_ON=1
CT_PRIO=4
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=10
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100061
CT_NAME=Basic Touch
CT_ON=1
CT_PRIO=5
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=18
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100060
CT_NAME=Basic Synthesis
CT_ON=1
CT_PRIO=6
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
Use version 2.1.0 for now... there is 2.2 coming out Sunday hopefully... :P

This is 2.1

Oh well, that's strange... I'm currently working on 2.2, it's nearly ready for testing :P

RE: Help with setting up profiles - R3P0 - 11-23-2013

(11-23-2013, 03:10 PM)ymko Wrote:
(11-23-2013, 02:32 PM)R3P0 Wrote:
(11-23-2013, 02:08 PM)ymko Wrote:
(11-23-2013, 01:45 PM)R3P0 Wrote: Im well on into Weaver at this point and things still do not setup 100 percent correctly with these new settings

I am trying to setup a weaver profile for 30+ and getting now where fast, from what i see this should run but it does not it just sits there again
CT_Prof=Weaver
CT_ID=100098
CT_NAME=Tricks Of The Trade
CT_ON=1
CT_PRIO=1
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=246
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=Good
CT_CONDTWO=Good
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=256
CT_NAME=Inner Quiet
CT_ON=1
CT_PRIO=2
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=1
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=251
CT_END=0
CT_ID=281
CT_NAME=Steady Hand II
CT_ON=1
CT_PRIO=3
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=262
CT_END=0
CT_ID=100062
CT_NAME=Master's Mend
CT_ON=1
CT_PRIO=4
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=10
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100061
CT_NAME=Basic Touch
CT_ON=1
CT_PRIO=5
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=18
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
CT_ID=100060
CT_NAME=Basic Synthesis
CT_ON=1
CT_PRIO=6
CT_DURACHECK=0
CT_IQSTACKS=0
CT_CPMIN=0
CT_CPMAX=0
CT_STEPMIN=0
CT_STEPMAX=0
CT_PROGRESSMIN=0
CT_PROGRESSMAX=0
CT_QUALITYMIN=0
CT_QUALITYMAX=0
CT_DURABILITYMIN=0
CT_DURABILITYMAX=0
CT_CONDONE=
CT_CONDTWO=
CT_BUFF=0
CT_NOTBUFF=0
CT_END=0
Use version 2.1.0 for now... there is 2.2 coming out Sunday hopefully... :P

This is 2.1
Oh well, that's strange... I'm currently working on 2.2, it's nearly ready for testing :P

Its ready release it now =0)

RE: Help with setting up profiles - ymko - 11-23-2013

(11-23-2013, 07:11 PM)R3P0 Wrote: Its ready release it now =0)

It's not :) need to do the GUI, which I will do after I watch Dr.Who!

RE: Help with setting up profiles - darkboz - 11-25-2013

It seems ymko got stuck in the TARDIS, no new version !

Snicker

RE: Help with setting up profiles - ymko - 11-25-2013

(11-25-2013, 01:34 PM)darkboz Wrote: It seems ymko got stuck in the TARDIS, no new version !

I wish I had a TARDIS :D It's nearly there, just a few kinks to iron out, then i gonna do a private test and release a public test :P

RE: Help with setting up profiles - darkboz - 11-25-2013

(11-25-2013, 01:38 PM)ymko Wrote:
(11-25-2013, 01:34 PM)darkboz Wrote: It seems ymko got stuck in the TARDIS, no new version !

I wish I had a TARDIS :D It's nearly there, just a few kinks to iron out, then i gonna do a private test and release a public test :P

Nice, feel free to contact me if you ever need more beta testers ;)

RE: Help with setting up profiles - ymko - 11-25-2013

(11-25-2013, 09:48 PM)darkboz Wrote:
(11-25-2013, 01:38 PM)ymko Wrote:
(11-25-2013, 01:34 PM)darkboz Wrote: It seems ymko got stuck in the TARDIS, no new version !

I wish I had a TARDIS :D It's nearly there, just a few kinks to iron out, then i gonna do a private test and release a public test :P

Nice, feel free to contact me if you ever need more beta testers ;)

Sure PM me :)
It's annoying to do as i've written all functionality and nearly all GUI, just have to match it to GUI and fix possible errors(biggest problem is i've got no TARDIS and have to do Final Year Project for Uni) :/

RE: Help with setting up profiles - darkboz - 11-26-2013

(11-25-2013, 09:56 PM)ymko Wrote:
(11-25-2013, 09:48 PM)darkboz Wrote:
(11-25-2013, 01:38 PM)ymko Wrote:
(11-25-2013, 01:34 PM)darkboz Wrote: It seems ymko got stuck in the TARDIS, no new version !

I wish I had a TARDIS :D It's nearly there, just a few kinks to iron out, then i gonna do a private test and release a public test :P

Nice, feel free to contact me if you ever need more beta testers ;)
Sure PM me :)
It's annoying to do as i've written all functionality and nearly all GUI, just have to match it to GUI and fix possible errors(biggest problem is i've got no TARDIS and have to do Final Year Project for Uni) :/

Ouch GL with that Happy

, sure will PM soon ;)

RE: Help with setting up profiles - rexmundi - 11-26-2013

Ohw did DR. Who started again ?? prolly missed it then :P

RE: Help with setting up profiles - ymko - 11-27-2013

(11-26-2013, 10:21 PM)rexmundi Wrote: Ohw did DR. Who started again ?? prolly missed it then :P

50th anniversarry special it was in theaters in a lot of countries, simulcasts at the same time on tv and so on... pretty much there was the BIGGEST amount of Whovians watching Dr.Who at the same time... I wonder how many ppl when they release the figures :)

BBC Wrote:The Day of the Doctor was broadcast in 94 countries at the same time as it aired on BBC One on Saturday night - earning it a Guinness World Record as "the world's largest ever simulcast of a TV drama".

Although calling a TV Drama, is just making drama :/ It's thy world's greatest sci-fi show. They should stahp.