[Chunky]

First off, thanks much for your work on these profiles. They are nicely done! Hopefully you're still working with this one.

I just started looking into this profile, I generally run BLM manually. Here is some initial reactions, single target only.

Doesn't seem to be using an available proc (or both if it's your 30s enochian) before entering Ice phase. Is this intended?

Manually running blm, if your enochian timer was under 6 seconds you could always bliz3 > swiftcast > bliz4. That is, if the reasoning is that sometimes enochian would expire. Then again, if enochian recast is up there is no worry to use a Firestarter or Thundercloud and lose your buff. There is a lot of logic involved in running blm based on what procs/timers/swiftcast/convert/phase look like. It would make for probably too many chains in the profile to replicate. It seems like in a raid environment, when you switch target, interrupt cast, etc., it is normally chains in the profiles that cause the skillmanager lock ups and confusions.

Then there are the thunder procs. Manually, you might want to move the placement of a thundercloud if it is about to expire and you won't lose your fire rotation. You might also want to move the placement of a thunder 1 or bliz 1 filler if you have time on enochian and need a tick before a bliz4.

There is a filler priority too, if you have a thunder dot going then you'll cast bliz 1 as the filler.

Flare in the opener to replace one of the fire4's is a dps increase too. F3 > F1 > F4 > F4 > F4 > F4 > firestarter > SC Flare convert > F4 > B3

If you have the option to use one proc and have both, Thundercloud is the better choice always.

TY Hxx, keep on casting folks!