Thread Rating:
  • 20 Vote(s) - 3.6 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Skill Manager Questions
#1
So I am looking to make the perfect assist mode for a my style of Paladin. I read the guide: http://www.mmominion.com/Thread-Tutorial...l-Profiles

I found the guide covers the very basics. But is not the same so for example Combo Break is missing.

My goal is for "fight or flight" to always be on so as soon as cool down comes of it fires up again but there is nothing to indicate it does not Combo Break.

i have another skill that does combo break so i had to not include it incase it fired int he middle of my combo.

Also i have 2 other buffs I want on but not at the same time. So when buff A has ran out and is still on cool down then buff b should be used. When buff b has run out go to buff A.

I tried putting fight or flight at the top and the combo skillz in revers order and only did my 3 skill combo.

Combo Break seams to be missing.

and i have no idea using the skill manager how to do the above buff combo.
Reply
#2
Combo breaker is obsolete.

To restrict skill usage when a buff is active...
Player buffs.. missing buffs.. enter the buff id.
http://www.mmominion.com/Thread-Buff-Qui...hlight=146

[Image: aa6774a1ac.jpg]

Try this one.
https://www.dropbox.com/s/plkvsbw0umh8to...2.lua?dl=0
Reply
#3
(02-19-2015, 01:57 PM)sebbs Wrote:  Combo breaker is obsolete.

To restrict skill usage when a buff is active...
Player buffs.. missing buffs.. enter the buff id.
http://www.mmominion.com/Thread-Buff-Qui...hlight=146

[Image: aa6774a1ac.jpg]

Try this one.
https://www.dropbox.com/s/plkvsbw0umh8to...2.lua?dl=0

i don't want to restrict a spell

i have 3 buffs i want the assist to cast for me

1. is Fight or Flight as soon as it is ready it should just cast

2. is rampart and it should cast immediately then when the buff is finished about 20 sec Foresight should cast that lasts for another 20 seconds

3. as soon as rampart is ready it should cast again then in 20secs it is finished so Foresight should cast then in 20sec go to step 2

am i explaining right?

will try your profile when i get home :)
Reply
#4
(02-19-2015, 02:11 PM)aDent Wrote:  
(02-19-2015, 01:57 PM)sebbs Wrote:  Combo breaker is obsolete.

To restrict skill usage when a buff is active...
Player buffs.. missing buffs.. enter the buff id.
http://www.mmominion.com/Thread-Buff-Qui...hlight=146

[Image: aa6774a1ac.jpg]

Try this one.
https://www.dropbox.com/s/plkvsbw0umh8to...2.lua?dl=0

i don't want to restrict a spell

i have 3 buffs i want the assist to cast for me

1. is Fight or Flight as soon as it is ready it should just cast

2. is rampart and it should cast immediately then when the buff is finished about 20 sec Foresight should cast that lasts for another 20 seconds

3. as soon as rampart is ready it should cast again then in 20secs it is finished so Foresight should cast then in 20sec go to step 2

am i explaining right?

will try your profile when i get home :)

Yes so you will need to add a restriction on when the buff casts. such as
cast Fight or Flight if missing buff Rampart + Foresight.
cast Rampart if missing buff Foresight+ Fight or Flight.
cast Foresight if missing buff Fight or Flight + Rampart.

otherwise they will cast one after another while the other buffs are up.
Reply
#5
(02-19-2015, 02:19 PM)sebbs Wrote:  
(02-19-2015, 02:11 PM)aDent Wrote:  
(02-19-2015, 01:57 PM)sebbs Wrote:  Combo breaker is obsolete.

To restrict skill usage when a buff is active...
Player buffs.. missing buffs.. enter the buff id.
http://www.mmominion.com/Thread-Buff-Qui...hlight=146

[Image: aa6774a1ac.jpg]

Try this one.
https://www.dropbox.com/s/plkvsbw0umh8to...2.lua?dl=0

i don't want to restrict a spell

i have 3 buffs i want the assist to cast for me

1. is Fight or Flight as soon as it is ready it should just cast

2. is rampart and it should cast immediately then when the buff is finished about 20 sec Foresight should cast that lasts for another 20 seconds

3. as soon as rampart is ready it should cast again then in 20secs it is finished so Foresight should cast then in 20sec go to step 2

am i explaining right?

will try your profile when i get home :)

Yes so you will need to add a restriction on when the buff casts. such as missing buff rampart + foresight.

otherwise they will cast one after another while the other buffs are up.


aaaaaaah so if I'm in the rampart profile i add foresight to the missing buff it will only cast rampart if foresight is not up

whats the difference between the , and the + i see examples of both in the section
Reply
#6
(02-19-2015, 02:25 PM)aDent Wrote:  
(02-19-2015, 02:19 PM)sebbs Wrote:  
(02-19-2015, 02:11 PM)aDent Wrote:  
(02-19-2015, 01:57 PM)sebbs Wrote:  Combo breaker is obsolete.

To restrict skill usage when a buff is active...
Player buffs.. missing buffs.. enter the buff id.
http://www.mmominion.com/Thread-Buff-Qui...hlight=146

[Image: aa6774a1ac.jpg]

Try this one.
https://www.dropbox.com/s/plkvsbw0umh8to...2.lua?dl=0

i don't want to restrict a spell

i have 3 buffs i want the assist to cast for me

1. is Fight or Flight as soon as it is ready it should just cast

2. is rampart and it should cast immediately then when the buff is finished about 20 sec Foresight should cast that lasts for another 20 seconds

3. as soon as rampart is ready it should cast again then in 20secs it is finished so Foresight should cast then in 20sec go to step 2

am i explaining right?

will try your profile when i get home :)

Yes so you will need to add a restriction on when the buff casts. such as missing buff rampart + foresight.

otherwise they will cast one after another while the other buffs are up.


aaaaaaah so if I'm in the rampart profile i add foresight to the missing buff it will only cast rampart if foresight is not up

whats the difference between the , and the + i see examples of both in the section

Previously. , was or.
so if 254 or 256 was active dont cast.

now i think it just +
Reply
#7
(02-19-2015, 02:31 PM)sebbs Wrote:  
(02-19-2015, 02:25 PM)aDent Wrote:  aaaaaaah so if I'm in the rampart profile i add foresight to the missing buff it will only cast rampart if foresight is not up

whats the difference between the , and the + i see examples of both in the section

Previously. , was or.
so if 254 or 256 was active dont cast.

now i think it just +


again super thx that helped a lot
Reply
#8
"," is still "or" and "+" is still "and", but it's a matter of how you have to read it concerning negative buff evaluation.

To elaborate (note: I'm using names instead of actual BuffIDs because I don't know care to look them up):

cast Fight or Flight if missing buff Rampart + Foresight.".. Cast FoF if [MissingBuffs] "Rampart+Foresight"
cast Rampart if missing buff Foresight+ Fight or Flight .. Cast Rampart if [MissingBuffs] "Foresight+FoF"
cast Foresight if missing buff Fight or Flight + Rampart. .. Cast Foresight if [MissingBuffs] "Flight+Rampart"

So what if I wanted to:
Cast FoF if missing buff rampart or missing buffs foresight and fof .. [MissingBuffs] "Rampart,Foresight+FoF"
Cast B4B if I have buffs hawkeye+barrange or I have buff internal release.. [HasBuffs] "Hawkeye+Barrange,Internal Release"

In addition, the "," is the main separator, and the "+" are evaluated with in each ",".
Reply
#9
(02-19-2015, 10:20 PM)Ace Wrote:  "," is still "or" and "+" is still "and", but it's a matter of how you have to read it concerning negative buff evaluation.

To elaborate (note: I'm using names instead of actual BuffIDs because I don't know care to look them up):

cast Fight or Flight if missing buff Rampart + Foresight.".. Cast FoF if [MissingBuffs] "Rampart+Foresight"
cast Rampart if missing buff Foresight+ Fight or Flight .. Cast Rampart if [MissingBuffs] "Foresight+FoF"
cast Foresight if missing buff Fight or Flight + Rampart. .. Cast Foresight if [MissingBuffs] "Flight+Rampart"

So what if I wanted to:
Cast FoF if missing buff rampart or missing buffs foresight and fof .. [MissingBuffs] "Rampart,Foresight+FoF"
Cast B4B if I have buffs hawkeye+barrange or I have buff internal release.. [HasBuffs] "Hawkeye+Barrange,Internal Release"

In addition, the "," is the main separator, and the "+" are evaluated with in each ",".

cast Rampart if missing buff Foresight+ Fight or Flight .. Cast Rampart if [MissingBuffs] "Foresight+FoF"

in the above example rampart is cast before Foresight+FoF

working from that if i want foresight after that would put
[MissingBuffs] "Rampart+FoF" in foresight
Reply
#10
Yea, basically. Rampart is only cast first if you list it first by priority though, obviously.
Reply
 


Forum Jump:


Users browsing this thread: 4 Guest(s)

We help you win the game.

FFXIV Bot and More.

 

Products