(11-05-2013, 12:15 AM)ymko Wrote: [ -> ] (11-05-2013, 12:01 AM)R3P0 Wrote: [ -> ]ymko as always man you guys did a fantastic job how do you have your IQ stack set tho, Tricks, Steady hand II, Hasty, and Masters mend? I am having a bit of trouble getting the bot to pop off skills where it should
Right now I have it set as
1. IQ - Prio 0
2. Waste Not - Prio 2
3. Steady Hand II - Prio 3
4. Hasty Touch - Prio 4
5. Masters Mend <= 10 - Does not start
6. TOTT - Prio 1
7. Basic Synth <= 25, Priority 5
I can get it to do basic Synth but its missing Masters mend
IQ Stacks = Stacks of Inner Quiet
Check one of the profiles I have either weaversimple or testing they both have an idea of how it should be set up, TOTT should have prio 1 :P
I set ToTT to Priority 1 as suggested and it does not work.
I just keep getting cannot execute at this time
Current Setup following your weaver or testing guide
1. TOTT - Priority 1
2. Masters Mend - Priority 2 Dur <= 10
3. IQ - Prio 3, Buff not 251, IQ stacks 8
4. Waste Not - Prio 4, Buff not 252
5. Steady Hand II - Priority 5
6. Hasty Touch - Durability >= 20
7. Basic Synth - Priority 7 <= 20
Still sitting on Cannot execute, the bot will not move past TOTT how do you set this skill up it is not working.
This deserves its own forum with a section for profiles!
For the life of me I can not get this to do anything. I set up a profile.... click start/stop and nothing...
it refuses to let one use 2 of the same spell in the priority list.
If you change on the criterias on one the other one also changes.
But keep up the good work :) has allready come quite far tbh.
(11-05-2013, 01:22 AM)R3P0 Wrote: [ -> ] (11-05-2013, 12:15 AM)ymko Wrote: [ -> ]IQ Stacks = Stacks of Inner Quiet
Check one of the profiles I have either weaversimple or testing they both have an idea of how it should be set up, TOTT should have prio 1 :P
I set ToTT to Priority 1 as suggested and it does not work.
I just keep getting cannot execute at this time
Current Setup following your weaver or testing guide
1. TOTT - Priority 0 Condition = Good OR Good
2. IQ - Priority 1, Buff not 251
3. Waste Not - Priority 2, Buff not 252
4. Steady Hand II - Priority 3, Buff not 262
5. Masters Mend - Priority 4 Dur <= 10
6. Hasty Touch - Priority 5 Dur >= 20
7. Basic Synth - Priority 6 Dur <= 20
Still sitting on Cannot execute, the bot will not move past TOTT how do you set this skill up it is not working.
IQ Stacks are only for Rumination and the likes that require IQ stacks to work. You can switch the priority of 3 and 4 around. making SH2 abouve WN
(11-05-2013, 10:38 AM)dwrg Wrote: [ -> ]it refuses to let one use 2 of the same spell in the priority list.
If you change on the criterias on one the other one also changes.
But keep up the good work :) has allready come quite far tbh.
Have you read the first page?
(11-05-2013, 01:01 AM)gawc Wrote: [ -> ]Made a Goldsmith profile, trying to get it to work, something went wrong with the priority, and now I cannot load the profile I made.
Yes I have saved it
and the profile file is there, with my changes.
whenever I try load the profile, it only show the previous profile I have been into (those that were there from start)
OK, found out when in inside a skill, in the CraftingTool_SkillView you need to close the window after making changes, also remember to set condition, as it is set as none, nomatter what it say, unless you set it.
Try checking the console when you save it usually tells you what you are trying to save and whether successful or not.
None will always be true.
(11-05-2013, 03:12 AM)raty2021 Wrote: [ -> ]This deserves its own forum with a section for profiles!
Maybe later, when we get it out of beta and fix the majority of bugs that are currently just hidden, like 2 skills.
(11-05-2013, 09:15 AM)atmarkham Wrote: [ -> ]For the life of me I can not get this to do anything. I set up a profile.... click start/stop and nothing...
Can you show me a screenshot of CraftingTool, CraftingTool_SkillBook, CraftingTool_SkillManager + information about how you set up + Console when you are trying to craft?
appearently not good enough.
Sorry about that.
(11-05-2013, 10:43 AM)ymko Wrote: [ -> ] (11-05-2013, 01:22 AM)R3P0 Wrote: [ -> ] (11-05-2013, 12:15 AM)ymko Wrote: [ -> ]IQ Stacks = Stacks of Inner Quiet
Check one of the profiles I have either weaversimple or testing they both have an idea of how it should be set up, TOTT should have prio 1 :P
I set ToTT to Priority 1 as suggested and it does not work.
I just keep getting cannot execute at this time
Current Setup following your weaver or testing guide
1. TOTT - Priority 0 Condition = Good OR Good
2. IQ - Priority 1, Buff not 251
3. Waste Not - Priority 2, Buff not 252
4. Steady Hand II - Priority 3, Buff not 262
5. Masters Mend - Priority 4 Dur <= 10
6. Hasty Touch - Priority 5 Dur >= 20
7. Basic Synth - Priority 6 Dur <= 20
Still sitting on Cannot execute, the bot will not move past TOTT how do you set this skill up it is not working.
IQ Stacks are only for Rumination and the likes that require IQ stacks to work. You can switch the priority of 3 and 4 around. making SH2 abouve WN
I see what you are saying but if I switch 3/4 around Waste Not would use one of the Steady Hand II times and as a crafter we do not want that. Currently as is if you pop Steady hand II last you get 5x that can do abilities and 4/4 from Waste Not. If TOTT were to pop in there as well that will also reduce Steady hand II as many times as TOTT had proc.
(11-05-2013, 11:35 AM)R3P0 Wrote: [ -> ] (11-05-2013, 10:43 AM)ymko Wrote: [ -> ] (11-05-2013, 01:22 AM)R3P0 Wrote: [ -> ] (11-05-2013, 12:15 AM)ymko Wrote: [ -> ]IQ Stacks = Stacks of Inner Quiet
Check one of the profiles I have either weaversimple or testing they both have an idea of how it should be set up, TOTT should have prio 1 :P
I set ToTT to Priority 1 as suggested and it does not work.
I just keep getting cannot execute at this time
Current Setup following your weaver or testing guide
1. TOTT - Priority 0 Condition = Good OR Good
2. IQ - Priority 1, Buff not 251
3. Waste Not - Priority 2, Buff not 252
4. Steady Hand II - Priority 3, Buff not 262
5. Masters Mend - Priority 4 Dur <= 10
6. Hasty Touch - Priority 5 Dur >= 20
7. Basic Synth - Priority 6 Dur <= 20
Still sitting on Cannot execute, the bot will not move past TOTT how do you set this skill up it is not working.
IQ Stacks are only for Rumination and the likes that require IQ stacks to work. You can switch the priority of 3 and 4 around. making SH2 abouve WN
I see what you are saying but if I switch 3/4 around Waste Not would use one of the Steady Hand II times and as a crafter we do not want that. Currently as is if you pop Steady hand II last you get 5x that can do abilities and 4/4 from Waste Not. If TOTT were to pop in there as well that will also reduce Steady hand II as many times as TOTT had proc.
ToTT = +20cp
Steady Hand 2 = 25cp
So ToTT restores Steady Hand for 4 out of 5 steps...
(11-05-2013, 11:37 AM)ymko Wrote: [ -> ] (11-05-2013, 11:35 AM)R3P0 Wrote: [ -> ] (11-05-2013, 10:43 AM)ymko Wrote: [ -> ] (11-05-2013, 01:22 AM)R3P0 Wrote: [ -> ] (11-05-2013, 12:15 AM)ymko Wrote: [ -> ]IQ Stacks = Stacks of Inner Quiet
Check one of the profiles I have either weaversimple or testing they both have an idea of how it should be set up, TOTT should have prio 1 :P
I set ToTT to Priority 1 as suggested and it does not work.
I just keep getting cannot execute at this time
Current Setup following your weaver or testing guide
1. TOTT - Priority 0 Condition = Good OR Good
2. IQ - Priority 1, Buff not 251
3. Waste Not - Priority 2, Buff not 252
4. Steady Hand II - Priority 3, Buff not 262
5. Masters Mend - Priority 4 Dur <= 10
6. Hasty Touch - Priority 5 Dur >= 20
7. Basic Synth - Priority 6 Dur <= 20
Still sitting on Cannot execute, the bot will not move past TOTT how do you set this skill up it is not working.
IQ Stacks are only for Rumination and the likes that require IQ stacks to work. You can switch the priority of 3 and 4 around. making SH2 abouve WN
I see what you are saying but if I switch 3/4 around Waste Not would use one of the Steady Hand II times and as a crafter we do not want that. Currently as is if you pop Steady hand II last you get 5x that can do abilities and 4/4 from Waste Not. If TOTT were to pop in there as well that will also reduce Steady hand II as many times as TOTT had proc.
ToTT = +20cp
Steady Hand 2 = 25cp
So ToTT restores Steady Hand for 4 out of 5 steps...
its running now with your recommendations seems to be doing good so far all abilities seem to be procing, I had to change Waste not to CP >= 150 as it was not allowing Masters Mend to proc. I will upload my settings when there is an area for it as its for Leatherworker leveling 33-50 with 260+ CP
(11-05-2013, 01:02 PM)R3P0 Wrote: [ -> ] (11-05-2013, 11:37 AM)ymko Wrote: [ -> ] (11-05-2013, 11:35 AM)R3P0 Wrote: [ -> ] (11-05-2013, 10:43 AM)ymko Wrote: [ -> ] (11-05-2013, 01:22 AM)R3P0 Wrote: [ -> ]I set ToTT to Priority 1 as suggested and it does not work.
I just keep getting cannot execute at this time
Current Setup following your weaver or testing guide
1. TOTT - Priority 0 Condition = Good OR Good
2. IQ - Priority 1, Buff not 251
3. Waste Not - Priority 2, Buff not 252
4. Steady Hand II - Priority 3, Buff not 262
5. Masters Mend - Priority 4 Dur <= 10
6. Hasty Touch - Priority 5 Dur >= 20
7. Basic Synth - Priority 6 Dur <= 20
Still sitting on Cannot execute, the bot will not move past TOTT how do you set this skill up it is not working.
IQ Stacks are only for Rumination and the likes that require IQ stacks to work. You can switch the priority of 3 and 4 around. making SH2 abouve WN
I see what you are saying but if I switch 3/4 around Waste Not would use one of the Steady Hand II times and as a crafter we do not want that. Currently as is if you pop Steady hand II last you get 5x that can do abilities and 4/4 from Waste Not. If TOTT were to pop in there as well that will also reduce Steady hand II as many times as TOTT had proc.
ToTT = +20cp
Steady Hand 2 = 25cp
So ToTT restores Steady Hand for 4 out of 5 steps...
its running now with your recommendations seems to be doing good so far all abilities seem to be procing, I had to change Waste not to CP >= 150 as it was not allowing Masters Mend to proc. I will upload my settings when there is an area for it as its for Leatherworker leveling 33-50 with 260+ CP
I'll ask fxfire to make a topic for skill profile for this, see where it gets us :P